MAIN PAGE » TRIUMPH » Street Triple » Rear wheel axle protection Triumph Street Triple from 2017 by Evotech Performance

Rear wheel axle protection Triumph Street Triple from 2017 by Evotech Performance

Features of the rear axle protectors for the Triumph Street Triple/RS from 2017 onwards

    Designed and manufactured specifically for your 2017 and up Triumph Street Triple
    Rolled stainless steel spindle rod holds the coils in place
    Coil exterior made from injection moulded nylon
    Reinforced on both sides with a strong aluminium core
    Replacement spool heads can be purchased separately
    Easy to assemble

What is spindle bobbin crash protection?
EP Rear Wheel Spindle Bobbins for the 2017 and up Triumph Street Triple are designed to fit snugly through the rear wheel axle to protect against damage in the event of a crash.   The spindle bobbin heads are made from high quality nylon and aluminium to protect your bike from costly damage.   The nylon coil heads are also able to rotate on impact to reduce wheel stress and coil head wear.
Fits the following MODELS
INSTALLATION

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion

Customers who bought this product bought also the following products:

Reinforced number plate made of ALUCOBOND®...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar