Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Mobile Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Mobile Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.
Mobile Preview: Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.

Shock absorber adjustment wheel Ktm Superduke 1290 R from 2020 - Orange - Evotech S.R.L.

Product No.:
PA-0004/OR
immediately ready for dispatch immediately ready for dispatch  (abroad may vary)
Weight:
0.1 kg per piece
97,20 Dollar

incl. 19% tax excl. Shipping costs

PayPal ECS

Customers who bought this product bought also the following products:

WHEEL PADS Rear Axle - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

 
83,70 Dollar
KTM 1290 Super Duke R from 2020 Garmin Navi Holder by Evotech Performance
The Evotech Performance Garmin-compatible sat nav mount for the KTM 1290 Super Duke R mounts in the rider's peripheral field of vision to keep the right path in front of you while riding.   The holder is simply attached to the tank cap with the help of our INSTALLATION , the Garmin motorbike sat nav can then be attached in the rider's field of vision and adjusted with the thumbscrew behind the screen.

The holder is supplied without the sat nav. Compatible with all Zumo models
114,75 Dollar
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
16,20 Dollar