MAIN PAGE » TRIUMPH » Speed/Scrambler 400 » Triumph Speed / Scrambler 400 X licence plate holder from Evotech Performance 2024+

Preview: Triumph Scrambler 400 X licence plate holder from Evotech Performance 2024+

Triumph Speed / Scrambler 400 X licence plate holder from Evotech Performance 2024+

Mobile Preview: Triumph Scrambler 400 X licence plate holder from Evotech Performance 2024+

Description

Evotech Performance has developed and manufactured a short tail for your Speed 400 / Scrambler 400 X.
Secured in place with existing mounting points.
CNC machined from lightweight aircraft grade aluminium.
Powder coated black for durability.
No modifications to the motorbike are required.
We supply a new licence plate light. The original indicators can still be used.
No changes to the wiring are required, simply plug in and ride.
All necessary fixings are included in the kit.
Easy-to-understand video instructions are available for download: INSTALLATION

All intellectual property rights belong to Drury Precision Engineering Limited. Any infringement will be vigorously pursued. The Evotech Performance® brand name and the EP® logo are both registered trademarks of Drury Precision Engineering Ltd.

Products Safety/TÜV

Product safety/TÜV :: Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important / sensitive parts.
The licence plate holders are designed for a size of 180 x 200 mm.
If you mount a plate under the licence plate, make sure that it does not weigh more than 150 grams. We know of cases where 3 mm solid aluminium plates weighing 300 grams have been fitted. This is too much for the bracket. OUR plate weighs 150 grams
Please understand that we cannot accept any liability for consequential damage caused by incorrect installation.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE

Licence plate holders from Great Britain do not have an ABE. The licence plate light (if one is included in the scope of delivery) has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm. The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees. The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector. We have also provided further information on TÜV/ABE HERE.
Information for our Austrian customers specifically for the type approval or registration of licence plate holders can be found HERE
INSTALLATION INSTRUCTIONS:
For ecological reasons, we do not print out installation instructions or include them with the delivery.
Because of 1 x installation! We recommend (as we do the first time) to take the tablet or laptop with you to the workshop.

Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

Triumph Speed Triple 1200 RS number plate holder in BLACK 2021 + Evotech Performance

Triumph Speed Triple 1200 RS / RR number...

Evotech Performance has designed and manufactured a number plate holder that fully integrates with the sporty lines of your Speed Triple RS and uses the Triumph's existing brackets.
Suitable for the following MODELS
The stock turn signals and number plate light can be used.
No wiring is required, just plug in and go.
Our engineers have machined the indicator rods and main body from billet aluminium so the wires can be hidden. For an extremely clean finish.
This rear end can be fitted or removed in minutes, perfect for track days bikes.
All fixings and instructions are included in the kit.A matching number plate and reflector kit can be found HERE.
Mounting instructions can be found here:
INSTALLATION

327,50 Dollar

Triumph Rocket 3 R / 3 GT from 2020 License...

Evotech Performance has designed and manufactured a Rocket 3 R / GT licence plate holder that fully blends in with the sporty lines of your bike and uses the existing Triumph Rocket brackets.
Evotech Performance has designed this number plate holder to integrate the stock turn signals.
We have replaced the number plate light with an Evotech Performance LED tail light to better match the unique design.
No wiring is required, just plug in and go.
The main body is machined from billet aluminium, allowing the wires to be hidden for an extremely clean finish.
This short number plate holder is fully compatible with the rear seat and panniers.
All fixings and instructions are included in the kit.
Note: The underbody must be drilled to complete the installation of this item.
A 68-page INSTALLATION guide helps you with the installation.

473,75 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT

16,25 Dollar

This product was added to our catalog on Monday, June 3, 2024.