MAIN PAGE » TRIUMPH » Speed Triple RS / RR ab 2021 » Triumph Speed Triple 1200 RS Rear Wheel Axle Protection from 2021 Evotech Performance
.jpg)
Triumph Speed Triple 1200 RS Rear Wheel Axle Protection from 2021 Evotech Performance
Triumph Speed Triple 1200 RS Rear Wheel Axle Protection from 2021 Evotech Performance
- Product No.:
- PRN015485-Q4
- Shipping time:
-
immediately ready for dispatch (abroad may vary)
- Stock:
- pieces
- Weight:
- 0.5 kg per piece
Features of the rear wheel axle protectors for the Triumph Speed Triple from 2021 onwards
Rolled stainless steel spindle rod holds the coils in position.
One spool outer side made of injection moulded nylon with aluminium core.
The other side made of anodised aluminium.
Spare spool heads can be purchased separately
Easy to fit
EP axle protectors for Triumph are designed to fit snugly through the rear wheel to protect against damage in the event of an accident. The coil heads are made from high quality nylon and aluminium to protect your bike from costly damage. The nylon coil heads are also able to rotate on impact to reduce wheel stress and coil head wear.
INSTALLATION
Rolled stainless steel spindle rod holds the coils in position.
One spool outer side made of injection moulded nylon with aluminium core.
The other side made of anodised aluminium.
Spare spool heads can be purchased separately
Easy to fit
EP axle protectors for Triumph are designed to fit snugly through the rear wheel to protect against damage in the event of an accident. The coil heads are made from high quality nylon and aluminium to protect your bike from costly damage. The nylon coil heads are also able to rotate on impact to reduce wheel stress and coil head wear.
INSTALLATION
- Product safety :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:

This elegant and shapely exhaust holder from Evotech Performance in England fits your Triumph Speed Triple 1200 RS from model year 2021.
All necessary screws and parts are included.
No modifications to your bike are required.
Made from high strength aircraft grade aluminium. Black matt anodised for durability.
INSTALLATION
All necessary screws and parts are included.
No modifications to your bike are required.
Made from high strength aircraft grade aluminium. Black matt anodised for durability.
INSTALLATION
107,01 Dollar

Features of the front wheel axle protectors for the Triumph Speed Triple from 2016 onwards
Rolled stainless steel spindle rod holds the coils in place
Coil exterior made from injection moulded nylon
Reinforced on both sides with a strong aluminium core
Replacement spool heads can be purchased separately
Easy to assemble
What is spindle bobbin crash protection?
EP Front Spindle Bobbins for Triumph are designed to fit snugly through the front wheel and fork to protect against damage in the event of a crash. The spindle heads are made from high quality nylon and aluminium to protect your bike from costly damage. The nylon coil heads are also able to rotate on impact to reduce wheel stress and coil head wear.
Fits the following MODELS
INSTALLATION
Rolled stainless steel spindle rod holds the coils in place
Coil exterior made from injection moulded nylon
Reinforced on both sides with a strong aluminium core
Replacement spool heads can be purchased separately
Easy to assemble
What is spindle bobbin crash protection?
EP Front Spindle Bobbins for Triumph are designed to fit snugly through the front wheel and fork to protect against damage in the event of a crash. The spindle heads are made from high quality nylon and aluminium to protect your bike from costly damage. The nylon coil heads are also able to rotate on impact to reduce wheel stress and coil head wear.
Fits the following MODELS
INSTALLATION
56,58 Dollar

Perfect for tightening the rear wheel with the correct torque with ease.
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate
Square drive: 1/2 inch
Torque adjustable: 70 to 330 Nm
incl. case
Weight: 1.9 kg
Length: 563 mm
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate
Square drive: 1/2 inch
Torque adjustable: 70 to 330 Nm
incl. case
Weight: 1.9 kg
Length: 563 mm
RRP 121,77 Dollar
Only 97,17 Dollar
Only 97,17 Dollar

Tired of getting out the tool kit and putting the tools together every time you want to tighten your chain?
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
Custom-made for EVOTECHPARTS with engraving - Made in Germany
Then this is the right tool for you. Made of 4 mm galvanised steel with a hole for hanging on the tool wall.
Total length 40 cm
Custom-made for EVOTECHPARTS with engraving - Made in Germany
27,06 Dollar
This product was added to our catalog on Thursday, July 8, 2021.