MAIN PAGE » KTM 1290 » KTM 1290 R 2020 + » Turn signal adapter kit for turn signal with M8 fastening thread

Turn signal adapter kit for turn signal with M8 fastening thread

With our turn signal adapter kit you can mount turn signals with a M8 mounting thread.
This kit contains adapters for front and rear turn signals.
We deliver 4 new extended sleeves made of stainless steel to fix the turn signals in their position.
No modifications to the wiring harness are required, just plug and play with our direct wiring harness connectors.
This article is designed to be used in conjunction with the Evotech Performance KTM 1290 Super Duke R license plate holder.

Customer reviews (1)

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion

Customers who bought this product bought also the following products:

Reinforced number plate made of ALUCOBOND®...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
We stuck the number plate with mirror tape with 3 strips. Optically perfect and holds.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

16,20 Dollar

KTM 1290 SDR up to 2020 License plate holder...

Suitable for the 1290 KTM Super Duke R 2021
Evotech Performance has designed and manufactured a KTM Superduke license plate holder with CAD.W.T (Concealed Designed Wire Technology). The C.D.W.T is only achievable with the highest design and quality machining for which Evotech Performance is known.
Machined from billet aluminium and matt black coated. The original license plate light and turn signals (not included) are retained.
A new license plate light with matching adapter is included.
Plug & Play only, so no additional wiring is required. Incl. Reflektorkit.
Info: If the license plate light does not work, please exchange the cables. With the first series the manufacturer probably made a mistake.
INSTALLATION

348,30 Dollar