Water and oil cooler protection for the BMW S 1000 RR - from 2010 - 2018 and BMW S 1000 R from 2013 onwards
BMW S 1000 XR / XR TE Water and oil cooler protection set from 2020
Water and oil cooler protection for the BMW S 1000 RR - from 2010 - 2018 and BMW S 1000 R from 2013 onwards

BMW S 1000 XR / XR TE Water and oil cooler protection set from 2020

Product No.:
PRN014331-015018-I5
Shipping time:
immediately ready for dispatch immediately ready for dispatch (abroad may vary)
Weight:
0.6 kg per piece
180,70 Dollar

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
Water and oil cooler protection from EVOTECH PERFORMANCE for the following models:
BMW S 1000 XR / XR TE ab 2020. Check HERE to see if your motorbike is included.
Evotech's ingenious design means that this protection device is attached to the original mounting points on the motorcycle.
The elegantly designed matrix has hexagonal holes to optimize airflow while providing maximum protection from road debris.
Total weight of 420 grams.
The protection is CNC machined from aircraft grade aluminium.
The water and oil cooler protection for the BMW S 1000 XR from model year 2020 onwards is provided with a durable black powder coating.
Oil and water cooler protection has never looked so good!
INSTALLATION
Products Safety/TÜV
Product safety : 
Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com

Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com

General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
Please understand that we cannot accept any liability for consequential damage caused by improper installation.
When fitting, use threadlocker if possible and observe the torque specifications.
There is no ABE/parts certificate for Evotech Performance accessories. If you have any concerns, you should refrain from buying them. In some cases, bolts for fastening must be replaced with the original bolts. Legally, this could be a problem. We would like to point this out.
General torque specifications can be found HERE
Customer reviews

Unfortunately there are no reviews yet. Be the first who rates this product.

Customers who bought this product bought also the following products:

BMW S 1000 XR / XR TE axle protectors set from 2020 by Evotech Performance
BMW S 1000 XR / XR TE axle protectors set...
Features of the Evotech Performance axle protector set for the BMW S 1000 XR and XR TE from 2020.

    Injection moulded nylon coil heads sit on both sides of the wheel / swingarm
    Reinforced by an aluminium base for extra strength
    Spindle is held in place by a stainless steel spindle with rolled thread; all required fasteners are included in the kit
    Spare nylon spool heads are available separately
    Quick and easy to assemble. If you need help with this, you can find the instructions here in PDF format: INSTALLATION
    Made from technically superior materials by Evotech Performance
115,70 Dollar
Reinforced number plate made of DIBOND® material 180 x 200 mm
Reinforced number plate (D) 180 x 200 mm...

Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm

The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.

The holes on the plate were countersunk with a 5.5 mm drill bit and then with a countersunk drill bit according to the screw.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
16,90 Dollar
BMW S 1000 XR from 2020 Side stand extension plate from Evotech Performance
BMW S 1000 XR from 2020 Side stand extension...
BMW S 1000 XR from 2020 Side stand extension plate from Evotech Performance
Suitable for the following MODELS
The Evotech Performance motorbike side stand extension plate is a high-quality accessory that increases stability and safety when parking.
The carefully crafted plate consists of a robust aluminium base plate combined with a pressed stainless steel top plate, ensuring durability and corrosion resistance.
Its innovative design increases the contact area of the side stand and provides more grip on different terrains, even on soft or uneven surfaces.
The extension plate is designed for easy installation and fits seamlessly into the existing motorbike structure.
Thanks to the high-quality materials and precision manufacturing, riders can rely on the stand to give them peace of mind during parking manoeuvres.
An easy-to-understand video installation guide is available for download: INSTALLATION
75,40 Dollar
This product was added to our catalog on Wednesday, July 22, 2020.