MAIN PAGE » TRIUMPH » Street Triple until 2022 » Triumph Street Triple / 765 Tail Tidy from Evotech Performance

.jpg)


.jpg)

TOP
License plate holder Triumph Street Triple S / R / RS EVOTECH PERFORMANCE
fits to Daytona 675 R/RS 2013 - 2017 and the new 2023er Street Triple 765
This label holder fits the following MODELS
Evotech Performance has designed and manufactured a license plate holder for your Triumph Street Triple.
No modifications to the motorcycle are required.
Secured by existing fixing points.
CNC made of light metal-aluminium.
Powder coated black for durability.
Supplied with new LED number plate illumination, reflector with bracket.
If you need a reinforced noble number plate, look HERE
No wiring change is required, simply plug and play.
All necessary fixings are supplied in kit.
The delivery comes disassembled without turn signals
The licence plate angle is approx. 35°
INSTALLATION
fits to Daytona 675 R/RS 2013 - 2017 and the new 2023er Street Triple 765
This label holder fits the following MODELS
Evotech Performance has designed and manufactured a license plate holder for your Triumph Street Triple.
No modifications to the motorcycle are required.
Secured by existing fixing points.
CNC made of light metal-aluminium.
Powder coated black for durability.
Supplied with new LED number plate illumination, reflector with bracket.
If you need a reinforced noble number plate, look HERE
No wiring change is required, simply plug and play.
All necessary fixings are supplied in kit.
The delivery comes disassembled without turn signals
The licence plate angle is approx. 35°
INSTALLATION
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of this holder is 35°.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of this holder is 35°.
Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
We have also provided further information on TÜV/ABE HERE.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:
This product was added to our catalog on Monday, September 10, 2018.