MAIN PAGE » BMW » BMW M / S 1000 XR from 2020 » BMW S 1000 XR / XR TE axle protectors set from 2020 by Evotech Performance

BMW S 1000 XR / XR TE axle protectors set from 2020 by Evotech Performance
BMW S 1000 XR / XR TE axle protectors set from 2020 by Evotech Performance
- Product No.:
- PRN011967-012699-Q1
- Shipping time:
-
soon available again (abroad may vary)
- Stock:
- pieces
- Weight:
- 0.8 kg per piece
This item is not in stock at the moment. You can still order it, but you will have to wait. INFO on the arrears can be found on the start page.
Features of the Evotech Performance axle protector set for the BMW S 1000 XR and XR TE from 2020.
Injection moulded nylon coil heads sit on both sides of the wheel / swingarm
Reinforced by an aluminium base for extra strength
Spindle is held in place by a stainless steel spindle with rolled thread; all required fasteners are included in the kit
Spare nylon spool heads are available separately
Quick and easy to assemble. If you need help with this, you can find the instructions here in PDF format: INSTALLATION
Made from technically superior materials by Evotech Performance
What is a spindle coil crash protector?
The Evotech Performance Spindle Coil Crash Protectors for the BMW S 1000 XR TE are made from matte black injection moulded nylon and offer discreet yet robust protection. With the added support of aluminium internals, the spindle coils aim to be the first to act in the event of an impact, protecting the expensive forks/swings, spindle mounts and brake calipers from damage. The innovative EP design allows the nylon spools to rotate over the aluminium to reduce wear and stress on the wheel.
Injection moulded nylon coil heads sit on both sides of the wheel / swingarm
Reinforced by an aluminium base for extra strength
Spindle is held in place by a stainless steel spindle with rolled thread; all required fasteners are included in the kit
Spare nylon spool heads are available separately
Quick and easy to assemble. If you need help with this, you can find the instructions here in PDF format: INSTALLATION
Made from technically superior materials by Evotech Performance
What is a spindle coil crash protector?
The Evotech Performance Spindle Coil Crash Protectors for the BMW S 1000 XR TE are made from matte black injection moulded nylon and offer discreet yet robust protection. With the added support of aluminium internals, the spindle coils aim to be the first to act in the event of an impact, protecting the expensive forks/swings, spindle mounts and brake calipers from damage. The innovative EP design allows the nylon spools to rotate over the aluminium to reduce wear and stress on the wheel.
Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
Tel. 01507 464125
Dan Rack dan @ drury-precision.co.uk
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:

Features of the EP front wheel spools for the BMW R 1200 GS / R 1250 GS from 2013 onwards
Here you can check if your motorbike is included: All MODELS
Injection molded nylon spool with aluminum core
Held on both sides of the wheel by a spindle rod
Replacement hollow spindle bolt with required fasteners included
Easy to install
Manufactured from high quality materials
Spindle heads can be purchased separately
INSTALLATION
Here you can check if your motorbike is included: All MODELS
Injection molded nylon spool with aluminum core
Held on both sides of the wheel by a spindle rod
Replacement hollow spindle bolt with required fasteners included
Easy to install
Manufactured from high quality materials
Spindle heads can be purchased separately
INSTALLATION
195,57 Dollar

The Evotech Performance Motorcycle USB Charger is a device that supplies power to electronic devices via a USB interface.
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE
Extended range: The 2.2 metre long cable offers a long range so that you can conveniently install and mount the USB charger in different places on your motorbike. This flexibility ensures that the charger can be optimally positioned to be accessible while riding or parking.
Direct connection to the battery or ignition switch: Direct connection to the motorbike battery or ignition switch ensures a stable and reliable power source for the USB charger. However, we recommend connecting a fuse element in between. This direct wiring allows the charger to draw power directly from the motorbike's electrical system, ensuring a consistent and reliable power supply for chargers.
You can find an installation video HERE
35,67 Dollar

Features of the Evotech handlebar end weights. 275 grams per side
Suitable for MODELS
Developed for seamless connection to the OE bar end mirrors from BMW
CNC-machined from stainless steel, including all fastening elements
Increases the weight at the bar ends to combat unwanted handlebar vibrations
The Evotech handlebar end weights are finished with a durable black powder coating and the characteristic EP logos
Easy installation with the downloadable video: INSTALLATION
Suitable for MODELS
Developed for seamless connection to the OE bar end mirrors from BMW
CNC-machined from stainless steel, including all fastening elements
Increases the weight at the bar ends to combat unwanted handlebar vibrations
The Evotech handlebar end weights are finished with a durable black powder coating and the characteristic EP logos
Easy installation with the downloadable video: INSTALLATION
119,31 Dollar

Water and oil cooler protection from EVOTECH PERFORMANCE for the following models:
BMW S 1000 XR / XR TE ab 2020. HERE to see if your motorbike is included.
Evotech's ingenious design means that this protection device is attached to the original mounting points on the motorcycle.
The water and oil cooler protection for the BMW S 1000 XR from model year 2020 onwards is provided with a durable black powder coating.
Oil and water cooler protection has never looked so good!
INSTALLATION
BMW S 1000 XR / XR TE ab 2020. HERE to see if your motorbike is included.
Evotech's ingenious design means that this protection device is attached to the original mounting points on the motorcycle.
The water and oil cooler protection for the BMW S 1000 XR from model year 2020 onwards is provided with a durable black powder coating.
Oil and water cooler protection has never looked so good!
INSTALLATION
166,05 Dollar
This product was added to our catalog on Monday, July 25, 2022.