MAIN PAGE » TRIUMPH » Speed Triple RS / RR ab 2021 » Triumph Speed Triple 1200 RS / RR number plate holder 2021 + Evotech Performance
Evotech Performance has designed and manufactured a number plate holder that fully integrates with the sporty lines of your Speed Triple RS and uses the Triumph's existing brackets.
The stock turn signals and number plate light can be used.
No wiring is required, just plug in and go.
Our engineers have machined the indicator rods and main body from billet aluminium so the wires can be hidden. For an extremely clean finish.
This rear end can be fitted or removed in minutes, perfect for track days bikes.
All fixings and instructions are included in the kit.
A matching number plate and reflector kit can be found HERE.
Mounting instructions can be found here:
INSTALLATION
The stock turn signals and number plate light can be used.
No wiring is required, just plug in and go.
Our engineers have machined the indicator rods and main body from billet aluminium so the wires can be hidden. For an extremely clean finish.
This rear end can be fitted or removed in minutes, perfect for track days bikes.
All fixings and instructions are included in the kit.
A matching number plate and reflector kit can be found HERE.
Mounting instructions can be found here:
INSTALLATION
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
We have also provided further information on TÜV/ABE HERE.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:
This product was added to our catalog on Thursday, July 8, 2021.