MAIN PAGE » TRIUMPH » Trident over 2021 » Triumph Trident 2021-2024 Number Plate Holder by Evotech Performance

Triumph Trident 2021-2024 Number Plate Holder by Evotech Performance
- Product No.:
- PRN015396-015449-004551-O6
- Shipping time:
-
immediately ready for dispatch (abroad may vary)
- Stock:
- pieces
- Weight:
- 1.2 kg per piece
Evotech Performance has developed and manufactured a short number plate holder for the Triumph Trident series.
This fits harmoniously with the overall appearance of your Triumph Trident from year of manufacture 2021-2024.
CNC machined from lightweight aircraft quality aluminium.
The original turn signals can still be used.
The entire electrical system is plug and play. No cutting or wiring required.
Powder coated black for durability.
All necessary fixings are included in the kit. Incl. Reflektorkit
We have also manufactured a vacuum formed plastic chain guard to cover the original number plate bracket on the swing arm.
This is also included in the kit. A reflector kit with bracket is also included, as well as the rear light with number plate illumination and E approval mark.
Only a custom-fit number plate made of ALUCOBOND® is not included. We offer this HERE.
An easy to follow, illustrated manual is available for download: INSTALLATION
This fits harmoniously with the overall appearance of your Triumph Trident from year of manufacture 2021-2024.
CNC machined from lightweight aircraft quality aluminium.
The original turn signals can still be used.
The entire electrical system is plug and play. No cutting or wiring required.
Powder coated black for durability.
All necessary fixings are included in the kit. Incl. Reflektorkit
We have also manufactured a vacuum formed plastic chain guard to cover the original number plate bracket on the swing arm.
This is also included in the kit. A reflector kit with bracket is also included, as well as the rear light with number plate illumination and E approval mark.
Only a custom-fit number plate made of ALUCOBOND® is not included. We offer this HERE.
An easy to follow, illustrated manual is available for download: INSTALLATION
- Product safety/TÜV :
- Manufacturer:
Evotech Performance
8 Beechings Way, Alford, Lincolnshire, LN13 9JE
+44(0) 1507 466729
sales@evotech-performance.com
Importer / first distributor:
EVOTECH GERMANY
Lothar Westphal
Eichendorffstr. 9
78239 Rielasingen
Tel.07731 8229019
mail @ evotechparts.com
General safety instructions for the product:
We recommend that you always consult a specialist workshop when installing our products or have this work carried out by a specialist. If you fit it yourself, please make sure that your motorbike is secure and that the product is only intended for your motorbike. The models for which the product is tested and intended can be found with each item.
To avoid damage to your motorbike during installation, we recommend covering all important/sensitive parts.
When fitting, use threadlocker if possible and observe the torque specifications. The fixing screws on the licence plate holder in particular should be secured with threadlocker. Loss of the licence plate holder due to lost screws can cause unpleasant damage.
General torque specifications can be found HERE
Licence plate holders from Great Britain do not have an ABE. The licence plate lighting has an E approval mark. The indicator spacing is 180 mm. Suitable adapters are usually included to bring the indicator spacing to the legally required 180 mm.
The legally required licence plate angle of 30 degrees cannot be complied with on all British licence plate holders, as they are mounted much further in the direction of travel and may come into contact with the tyre at 30 degrees.
The angle of 30 degrees must be checked and adjusted on the vehicle. Take the suspension travel of the motorbike into account. If space is tight, we recommend fitting the narrower version of the rear reflector.
We have also provided further information on TÜV/ABE HERE.
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
Customers who bought this product bought also the following products:
.jpg)
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
This is identical to the curves of the number plate.
The plate is matt black on one side and glossy black on the other.
For our customers from SWITZERLAND or LICHTENSTEIN we also have the right size in stock: 140 x 180 mm plate
For our customers from Austria we can recommend this plate: 210 x 170 mm
The plate is supplied without holes.
We used 5 mm countersunk screws for mounting on a KTM Super Duke R 1.0.
It is best to use a pillar drill with a depth stop for this.
To secure the M5 cap nut we use Loctite 243.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
Alternatively, we also offer a higher-quality reflector kit: REFLEKTORKIT
15,73 Dollar

Evotech Performance have designed and manufactured a tail tidy for the Tiger Sport Evotech Performance have designed and manufactured a short number plate holder for the Tiger Sport 660 / 800 which can be used in conjunction with the standard Triumph panniers.
If you need a reinforced noble number plate, look HERE
Easy to follow illustrated instructions are available for download: INSTALLATION
If you need a reinforced noble number plate, look HERE
Easy to follow illustrated instructions are available for download: INSTALLATION
235,95 Dollar

License plate holder Triumph Street Triple S / R / RS EVOTECH PERFORMANCE
fits to Daytona 675 R/RS 2013 - 2017 and the new 2023er Street Triple 765
This label holder fits the following MODELS
Evotech Performance has designed and manufactured a license plate holder for your Triumph Street Triple.
The delivery comes disassembled without turn signals and free of shipping costs.
Supplied with new LED number plate illumination, reflector with bracket.
The licence plate angle is approx. 35°
If you need a reinforced noble number plate, look HERE
INSTALLATION fits to Daytona 675 R/RS 2013 - 2017 and the new 2023er Street Triple 765
This label holder fits the following MODELS
Evotech Performance has designed and manufactured a license plate holder for your Triumph Street Triple.
The delivery comes disassembled without turn signals and free of shipping costs.
Supplied with new LED number plate illumination, reflector with bracket.
The licence plate angle is approx. 35°
If you need a reinforced noble number plate, look HERE
238,37 Dollar

Take a look at the slim and elegant design of this Evotech Performance number plate holder for your Kawasaki Ninja 1000 SX and how the number plate holder fits seamlessly into the sporty line of your Kawasaki Ninja 1000 SX. Passend anfolgenden MODELLEN
CNC machined from lightweight aircraft grade aluminium and finished with a tough satin black powder coating.....
INSTALLATION
CNC machined from lightweight aircraft grade aluminium and finished with a tough satin black powder coating.....
INSTALLATION
159,72 Dollar
This product was added to our catalog on Sunday, February 20, 2022.