1290 R 2017-19

Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019
KTM 1290 Super Duke R license plate holder - 2019 by EVOTECH PERFORMANCE
-5%
Evotech Performance has designed and manufactured this KTM Superduke license plate holder.
Machined from billet aluminum and coated matte black.
The original license plate light (not included) is retained.
Plug and play only so no additional wiring is required.
Please note that after installation a case system may not fit.
Fits only on the 1290 Super Duke R and SE through 2019.
INSTALLATION
RRP 190,75 Dollar
Only 179,85 Dollar
incl. 19% tax excl. Shipping costs
Motor protection for KTM 1290 SDR from 2014 from EVOTECH PERFORMANCE
Evotech Performance has designed and manufactured a motor protection for the KTM 1290 R (2014-2019) Superduke
INSTALLATION

YOUTUBE Video


 
130,80 Dollar
incl. 19% tax excl. Shipping costs
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
Clutch Release / Pressure Plate Black KTM 1290 SDR/GT LC8 Engine
39,24 Dollar
incl. 19% tax excl. Shipping costs
Formring clutch cover KTM LC8 1290ccm SuperDuke or GT
Formring clutch cover KTM LC8 1290ccm
Sealing ring for the original or transparent clutch cover from Evotech SRL
The sealing ring cannot be inserted, but must be pushed in piece by piece, so to speak.
Otherwise it will be too long when you put it in.

 
8,72 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,51 Dollar
incl. 19% tax excl. Shipping costs
Screw set for clutch cover KTM 1290 by Evotech Italy
TOP
Aluminium screws M6 for clutch cover KTM 1290 made of Ergal 7075 by Evotech Italy
For use on the original - and on the EVOTECH clutch cover you need the following quantities and dimensions:
3 x 85 mm and 2 x 25 mm (original length).
When using the EVOTECH clutch cover protector (PRO-09-01) you need the following quantities and dimensions:
1 x 25 mm, 1 x 30 mm, 2 x 85 mm, 1 x 90 mm
Tightening torques: 8 NM
from 2,51 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 engine bolt set - 36 pcs. black anodised by Evotech Italy
KTM 1290 engine bolt set M6 - 36 pcs. black anodised by Evotech Italy
Duraluminium screws in Ergal 7075 T6 for the engine.
This kit contains screws of the same length as the original screws.
Please unscrew one original screw at a time and replace it with the duraluminium screw.
Please do not unscrew all screws at once.
It is also recommended to oil or grease the thread of the screws accordingly during assembly.
Tightening torque: 8 NM
Price per screw: 3,02 €
118,81 Dollar
incl. 19% tax excl. Shipping costs
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Aluminium screws M5 x 30 for the tank cap KTM 1290 made of Ergal 7075 by Evotech Italy
Tightening torque: 5 NM
Also fits Ducati Multistrada 1200/1260 and Hypermotard 950
14,17 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 hook spanner galvanised steel chain tensioner
You don't want to get out the toolbox and put together the rickety KTM tool every time you want to tighten your chain?
Then here is the right tool for you. Made of 4 mm galvanised steel with recessed grip and hole for hanging on the tool wall.
23,98 Dollar
incl. 19% tax excl. Shipping costs
Brake caliper protection for Brembo brake calipers from Evotech Performance
Evotech Performance has designed and manufactured a protection to protect your Brembo brake calipers.
These brake caliper protectors can be fitted to your motorcycle without any modifications.
CNC machined from aircraft grade aluminium.
Finished with a durable black powder coating.
All necessary fixings are supplied with the kit.
Delivered are 1 pair for 2 brake calipers
fits on thies Models 
HERE
INSTALLATION
31,61 Dollar
incl. 19% tax excl. Shipping costs
KTM 1290 chainring carrier SuperDuke R / GT
KTM 1290 chainring carrier Super Duke R / GT
CNC made of billet aluminium in Italy. Orange or black anodized for long durability.
Optionally, the matching nut set can be used. The standard nuts also fit.
Only the original chainring carrier is replaced.
The shock absorber is not changed.
The conversion takes about 30 minutes.
Assembly & product video here:
YOUTUBE
185,30 Dollar
incl. 19% tax excl. Shipping costs
Garmin Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the Garmin mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Compatible with all Zumo models.
Note: The Garmin Motorcycle Navi is not included.
32,70 Dollar
incl. 19% tax excl. Shipping costs
SP Connect Navigation Interface Plate from Evotech Performance
This interface plate allows you to convert your Evotech Performance nav mount to the SP Connect mount system.
The mounts are machined from lightweight aluminium and feature EP's signature black powder coating.
The kit consists of:

    1 x interface plate
    1 x pivot plate  
    Plus all necessary fixings

This item is only compatible with Evotech Performance pivot style sat nav mounts.
Note: Our mount works in conjunction with SP micro stem mount alu #53122 and anti-vibration module #53135.
SP Connect interface plate #53122, smartphone case, connection cable and smartphone are not included.
32,70 Dollar
incl. 19% tax excl. Shipping costs
Quad Lock Schnittstellenplatte Navi von  Evotech Performance
Das Kit besteht aus:
    1 x Quad Lock Halterung
    1 x Schnittstellenplatte
    1 x Drehpunktplatte  
    Plus alle notwendigen Befestigungen

Dieser Artikel ist nur mit den Evotech Performance Navi-Halterungen im Pivot-Stil kompatibel.
Hinweis: Quad Lock Schnittstelle Smartphone Fall, Verbindungskabel, und Smartphone sind nicht enthalten.
45,78 Dollar
incl. 19% tax excl. Shipping costs
TomTom Navi mount on Evotech Performance bracket system
With this interface plate you can convert your Navi mount (from Evotech Performance) to the TomTom mounting system.
The mounts are milled from plastic.
The kit consists of:
    1 x interface plate
    1 x pivot plate  
    Plus all necessary mounts as shown.
This item is only compatible with Evotech Performance swivel mounts for navigation devices.
Note: The TomTom Motorcycle Navi is not included.
32,70 Dollar
incl. 19% tax excl. Shipping costs
EVOTECHPARTS Alloy nut M10x1.25 for chainring carrier KTM 1290 SDR / GT
Aluminium nut set M10x1.25 (6026 T 6 - high strength)
in RED anodised for original chainring carrier or the chainring carrier shown in the other photos.
The price is for 1 nut in RED
For the KTM 1290 SDR / GT
(6 pieces are required)
Tightening torque 45 Nm
5,45 Dollar
incl. 19% tax excl. Shipping costs
rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Left
Very high quality duraluminium nut (7075T6) for the left side of the chain wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
53,41 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - BLACK - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
62,13 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - Right
Very high quality duraluminium nut (7075T6) for the right side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut right side with 60 mm wrench size.
62,13 Dollar
incl. 19% tax excl. Shipping costs
Rear axle nut in duralumin for KTM 1290 - EVOTECH S.R.L - Orange - left
Very high quality duraluminium nut (7075T6) for the left side of the rear wheel.
By machining on CNC - controlled machines a great design and a refined look is realizable.
The 6 bulges and the 6 front holes reduce weight compared to the original without compromising stability. The tightening torque remains unchanged. The assembly is done with a standard ring spanner or nut.
Delivered: Rear axle nut left side with 41 mm wrench size.
53,41 Dollar
incl. 19% tax excl. Shipping costs
Smartphone holder with USB connection GUB-E
TOP
Very high-quality smartphone holder for motorbikes made of AL 6063 CNC-milled aluminium. Absolutely secure attachment of the smartphone.
It is not possible for it to fall out, even with the strongest vibrations.
The smartphone can be clamped in the holder in portrait or landscape format.
The holder can be adjusted from 58mm to 100mm and easily holds smartphones even with a protective cover.
26,16 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engin
Oil lock screw - ORANGE - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire.
The colour of the anodisation may change slightly when exposed to heat. This is not a reason for complaint, as it is unavoidable.
The rubber seal from the old lock can be reused....... YOUTUBE Video
27,25 Dollar
incl. 19% tax excl. Shipping costs
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine
Oil lock screw - BLACK - KTM 1290 SDR / GT / LC8 engine / 790 / 890 Duke
including sheet metal for receiving the safety wire. The rubber seal from the old lock can be reused....... YOUTUBE Video
27,25 Dollar
incl. 19% tax excl. Shipping costs
WHEEL PADS REAR AXLE - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Good protection for expensive motorcycle parts. Mounting on the rear wheel axle.
Assembly time approx. 10min. each axis
Weight: 220 grams per axlespare parts.
INSTALLATION

 
67,58 Dollar
incl. 19% tax excl. Shipping costs
Brake lining Brembo SA Sinter 07BB2065
original equipment flooring
Type 50, sintered metal
Design: Brake lining (disc brake)
Brake pad: Sintered metal OEM
width: 50,8 mm
height: 53,7 mm
thickness: 7,4 mm
With ABE
Suitable for the following motorcycles:
FAHRZEUGLISTE

 
43,60 Dollar
incl. 19% tax excl. Shipping costs
WHEEL PADS REAR AXLE - Nylon Pads - EVOTECH PERFORMANCE
Optimal protection for swingarm and fork with a slight fall or overturning of the motorcycle.
Suitable for the following MODELS
Good protection for expensive motorcycle parts. Mounting on the front wheel axle.....

INSTALLATION
50,14 Dollar
incl. 19% tax excl. Shipping costs
License plate and reflector mounting kit
Our laws require a reflector to be attached to the motorcycle.
Furthermore, you no longer need to worry about mounting license plates of different sizes on our license plate holders.
This kit also includes a set of license plate adapters suitable for all UK and international license plate sizes.
Contents of the kit:
    1 x reflector (self-adhesive)
    1 x reflector holder
    2 x number adapter
    6 x cable ties
    6 x number plate screws
    6 x number plate nuts
8,72 Dollar
incl. 19% tax excl. Shipping costs
Reinforced number plate made of ALUCOBOND® material 180 x 200 mm
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light ALUCOBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.
14,17 Dollar
incl. 19% tax excl. Shipping costs
Led number plate light for Evotech Italy number plate holder
Led number plate light for Evotech Italy number plate holder with E24 sign.
Cable length 42 cm.
Screw spacing: 30 mm
39,24 Dollar
incl. 19% tax excl. Shipping costs
Spare spindle head for Evotech Performance axle protectors
Evotech Performance's extensive range of axle protectors is designed to give your machine the best possible protection.
Here you can find a part of them as spare part after a fall.
When it comes to safety, sometimes the smallest parts make the biggest difference.

Outer diameter: 46.5 mm
Outer diameter at the tip: 36 mm
Height: 26 mm
Bore: 12.4 mm
8,72 Dollar
incl. 19% tax excl. Shipping costs
Ersatz Crash Protektor Evotech
REPLACEMENT CRASH PROTECTOR  EVOTECH PERFORMANCE - 1 Pieces
60 mm x 70 mm
23,98 Dollar
incl. 19% tax excl. Shipping costs
License plate holder KTM 1290 SuperDuke R / SE 2014- 2019 from Progress Line
-22%
The license plate holder convinces with a long service life and very good weather resistance.
black powder-coated
the licence plate holder is suitable for every type of licence plate (width 175 mm)
  • no fairing parts have to be changed
  • Inclination angle can be adjusted without gaps
  • Blinker holders are adjustable in 3 positions and correspond to the distance according to StvO....
RRP 97,01 Dollar
Only 75,21 Dollar
incl. 19% tax excl. Shipping costs
EVOTECH PERFORMANCE Rectifier protection for KTM 1290 SDR
Rectifier protection for KTM 1290 SD R
This rectifier protection model 2014 - 2019 fits when used with:
original pillion footrests or only with right EVOTECH EXHAUST HOLD (or similar) or even if both are not mounted.
This holder fits therefore with every variation.
All screws and mounting parts are included.
INSTALLATION
41,42 Dollar
incl. 19% tax excl. Shipping costs
1 to 50 (from a total of 52)
Here you can find noble accessories from EVOTECH PERFORMANCE for your KTM 1290 R from 2017 to 2019