MAIN PAGE

Welcome to EVOTECHPARTS.COM
Specialization on Evotech Accessories from England and Italy

We are motorbike freaks through and through.
We know exactly what makes bikes and motorcyclists tick and why their heart beats for cruising, high-speed or optical tuning.
This is our drive and passion, which is why we have focused on Evotech accessories from England and Italy in our motorbike online shop.
Here you will find top quality motorbike parts and accessories.
Clutch cover transparent, number plate holder short, crash pads, radiator guard, crash protector, exhaust holder, engine guard, brake pads, anodised aluminium nuts, chainring carrier etc. are professional replacement / additional parts and are made of high-quality material.
EVOTECHPARTS.COM is your specialist when it comes to motorbike accessories and you value super service, competent advice and fast delivery.
We are happy to assist you by phone, e-mail or via the convenient call-back service.
If your desired product is in stock, the processing and ordering is ultra-fast and we ship via DHL.
As soon as the goods are with us, all backorders will be processed immediately.
Motorbike Shop EVOTECHPARTS.COM goes full throttle.

INFOS on the arrears: HERE
If you have any questions or a problem, please have a look at F.A.Q. - Fragen und Antworten
Follow us on Instagram: evotechparts_germany

Our advice

Ducati Streetfighter / Panigale V4 / V2 number...

EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 296,45 Dollar
Only 272,25 Dollar

Triumph Scrambler 400 X licence plate holder from Evotech Performance 2024+

Triumph Speed / Scrambler 400 X licence plate...

Evotech Performance has developed and manufactured a short tail for your Speed 400 / Scrambler 400 X.
Secured in place with existing mounting points.
CNC machined from lightweight aircraft grade aluminium.
Powder coated black for durability.
No modifications to the motorbike are required.
We supply a new licence plate light. The original indicators can still be used.
No changes to the wiring are required, simply plug in and ride.
All necessary fixings are included in the kit.
Easy-to-understand video instructions are available for download: INSTALLATION

142,78 Dollar

Ducati Multistrada V4 number plate holder...

Evotech Performance has designed and manufactured a number plate holder for the Ducati Multistrada V4 range.
Fits the following MODELS
Does not fit on the "RALLY"
CNC machined aluminium replacement tail light bracket, indicator brackets and number plate bracket.
The design includes a vacuum formed plastic underbody protector for a clean finish.
This number plate holder from Evotech Performance attaches to the existing mounting points on your Ducati Multistrada V4 and definitely requires no modifications to your bike.
The jewel is powder-coated black for durability.
The rear radar system is still fully functional.
You can still use your existing number plate lighting and original turn signals. Just plug it in and go.
All necessary fastening elements are included in the kit.
A reflector kit is included.
If you still need a suitable number plate, we can recommend this one: ALUCOBOND® Plate
This licence plate holder is fully compatible with the OEM cases and the top box.
An easy to understand, illustrated manual is available for download if you want to know how to mount the part: INSTALLATION

381,15 Dollar

Triumph Street Triple S / R / RS license plate holder from 2017 from Evotech Performance

Triumph Street Triple / 765 Tail Tidy from...

License plate holder Triumph Street Triple S / R / RS EVOTECH PERFORMANCE
fits to Daytona 675 R/RS 2013 - 2017 and the new 2023er Street Triple 765
This label holder fits the following MODELS
Evotech Performance has designed and manufactured a license plate holder for your Triumph Street Triple.
The delivery comes disassembled without turn signals and free of shipping costs.
Supplied with new LED number plate illumination, reflector with bracket.
The licence plate angle is approx. 35°
If you need a reinforced noble number plate, look HERE

INSTALLATION

238,37 Dollar

Specials

... of the month

Ducati Streetfighter / Panigale V4 / V2...

This model is suitable for Swiss and Lichtenstein licence plates.
EVOTECHPARTS has co-developed a shorter number plate holder and had it made exclusively for us in this design.
Fits all Ducati Streetfighter and Panigale models with the V2 or V4 engine (from 2020).
MADE IN GERMANY
You can find a YOUTUBE video HERE
Material: Black matt anodised aluminium incl. E-approved number plate light and reflector.
Included are 2 brackets for the standard turn signals* which can still be used. The licence plate is also included in the delivery.
The angle plate, which is locked into the motorbike mount, is made of steel (black powder-coated).
The angle is adjustable and has the required 30° as shown.
The distance between the turn signals and the end of the tyre also meets the legal requirements of 30 cm.
Thus "ALL SAFE".
If you still need an additional licence plate, we can recommend this one: LICENCE PLATE PLATE
Visually a very nice solution
* Indicators are not included in the scope of delivery
Also available with licence plate for Swiss and Lichtenstein licence plates on request

RRP 296,45 Dollar
Only 272,25 Dollar

Automatic torque wrench 1/2 inch 60-330 Nm...

Perfect for tightening the rear wheel with the correct torque with ease.
The long lever makes light work of it.
Switchable for left and right-hand operation. GS tested. The adapter 4000824474 is required to use the sockets also offered here (60, 55 and 41 mm).
With calibration certificate

    Square drive: 1/2 inch
    Torque adjustable: 70 to 330 Nm
    incl. case
    Weight: 1.9 kg
    Length: 563 mm

RRP 119,79 Dollar
Only 95,59 Dollar

Charging cable eyelet cable M6 / M8 with...

TECMATE accessories
Charging cable to charge the motorbike quickly and easily. The eyelets can be mounted on an M6 or M8 screw on the battery. This means you don't need to remove the battery cover every time.
For chargers OptiMATE 1, OptiMATE 2, OptiMATE 3, OptiMATE 4, OptiMATE 5, OptiMATE 6, OptiMATE 7, OptiMATE DC-DC, OptiMATE Lithium, Accu Mate, Accu Gard.
Eyelet cable M6/M8 with cap, SAE connection, 15 A fuse, length 50cm, retail packaging.
Ideal if you have several motorbikes or other vehicles but only one charger.

RRP 18,15 Dollar
Only 15,73 Dollar

Ducati Streetfighter V4 Rear Cover (2020+)...

Evotech Performance has designed and manufactured a rear cover for the Ducati Streetfighter V4 motorbikes.
Very quick to fit.
No modifications are required to your Ducati Streetfighter V4, V4S or V4 SP.
It is attached to the existing mounting points.
CNC machined from lightweight aircraft grade aluminium.
Powder coated black for durability.
All necessary mounting hardware is included in the kit.

RRP 66,55 Dollar
Only 47,19 Dollar

Ducati Streetfighter V4 wingletset made of...

Ducati Streetfighter V4 wingletset made of aluminium in RED by Evotech Italy
incl. 8 matching aluminium screws

RRP 296,45 Dollar
Only 237,16 Dollar

Reinforced number plate made of DIBOND® material 180 x 200 mm

10 Pieces - Reinforced number plate made...

10 pieces for a special price
Are you looking for a stable and visually clean solution for mounting your number plate?
We offer a 3 mm thick, 150 gram light DIBOND® plate with perfectly rounded, milled corners.
The reflector with the angle bracket is already included with most EVOTECH PERFORMANCE number plate holders. If not, you can get it HERE.

RRP 157,30 Dollar
Only 121,00 Dollar

TomTom compatible navigation holder for Yamaha,...

Description of the Evotech Performance TomTom compatible sat nav mount for the Yamaha, BMW and KTM.
You can find out which motorbike this mount fits here: All MODELS

    Designed to fit the TomTom mounting system perfectly
    Places a TomTom sat nav centrally in front of the rider
    Mounts to the handlebar clamp
    Adjustable horizontal pivot point for good visibility

    Fully compatible with the TomTom anti-theft lock. Part no. 9uge.001.06
    Installation instructions are available here: INSTALLATION

RRP 71,39 Dollar
Only 66,55 Dollar

Bremsbelag Brembo SA Sinter 07BB37SA - Front...

Design: Brake lining (disc brake)
Brake lining: Sintered metal road
width: 102,2 mm
height: 42 mm
thickness: 7,7 mm
Suitable for the following motorcycles:
VEHICLE LIST
If you want to install cheaper, but equally good, biting pads, take a look here: GALFER

RRP 71,39 Dollar
Only 54,45 Dollar

KETTEN KIT DID 525 ZVMX Silent for KTM 1290...

D.I.D chain set for the KTM 1290 SuperDuke R or GT from 2014 onwards
Translation: 17-38-112/525
Sprocket: steel, noise reduced, chain wheel: steel

DID Standard, 525ZVM-X(G&G), X-Ring
Quality: Standard
Features: noise reduced
Chain pitch: 525
Type: ZVMX
Number of chain links: 112
Design: X-Ring
Number of teeth Pinion: 17
Number of teeth sprocket: 38
Material: steel
Colour: gold

RRP 240,79 Dollar
Only 222,64 Dollar

Axle protection front axle Husqvarna Svartpilen / Vitpilen 701 Evotech Performance

Husqvarna Axle protection FRONT axle Svartpilen...

Features of the Evotech Performance front spindle impact protection for the Husqvarna Svartpilen / Vitpilen 701

Robust nylon coil heads with aluminium core
Mounted through the axle of the front fork
Including spindle rod and all necessary nuts
Evotech Performance manufactured using the highest quality materials
Individual replacement coils can be purchased separately

INSTALLATION

RRP 56,87 Dollar
Only 48,40 Dollar

Axle protection rear axle Husqvarna Svartpilen / Vitpilen 701 Evotech Performance

Husqvarna Axle protection rear axle Svartpilen...

Features of the Evotech Performance rear spindle impact protection for the Husqvarna Svartpilen / Vitpilen 701

Robust nylon coil heads with aluminium core
Mounted through the axle of the front fork
Including spindle rod and all necessary nuts
Evotech Performance manufactured using the highest quality materials
Individual replacement coils can be purchased separately

INSTALLATION

RRP 62,92 Dollar
Only 54,45 Dollar

ACE BIKES Transport lock Tyrefix Basic

ACE BIKES "Tyrefix Basic" transport safety device
Special belt fastening system with tensioning strap system for additional lashing of motorbikes and scooters of various types.
With the Tyrefix Basic, the front or rear tyre can be additionally secured on a trailer or transport vehicle. The vehicle must be secured with additional tensioning straps in order to secure it for transport in accordance with regulations.
Set incl. various fastening elements

RRP 75,02 Dollar
Only 60,02 Dollar

Suzuki GSX-R1000 Axle Protection Protector...

Features of the Evotech Performance Axle Protection Protector Set for the Suzuki GSX-R1000 / R
    Outer spool made of nylon, inner spool made of aluminium
    Held by stainless steel spindle rod through the wheel spindle
    Innovative design by Evotech Performance using the highest quality materials
    Replacement spool heads can be purchased separately

If you need help with installation, see the INSTALLATION s guide.

RRP 102,85 Dollar
Only 92,56 Dollar

YAMAHA YZF-R1, FZ-10, MT-10 Carbon fibre...

Evotech Performance has produced a carbon fibre toe guard for various Yamahas.
The Yamaha Carbon Fibre Footpeak Protector is machined from carbon fibre.
All fixings required are included in the kit.
Supplied is 1 toe guard as shown above left.
Evotech Performance has produced a carbon fibre toe guard for various Yamahas.
The Yamaha Carbon Fibre Footpeak Protector is machined from carbon fibre.
All fixings required are included in the kit.
Supplied is 1 toe guard as shown above left.
Suitable for the following MODELS
How to install the part you will find here: INSTALLATION

RRP 66,55 Dollar
Only 48,28 Dollar

Suzuki V-Strom 1050 Crash Protektor from Evotech Performance

Suzuki V-Strom 1050 Crash Protektor up 2020...

Evotech Performance has designed and manufactured impact protectors for the Suzuki V-Strom 1050 that are very easy to fit.
Simply attach to the existing mounting points on your motorbike.
No modifications are required.
The mounts are CNC machined from aircraft grade aluminium and powder coated black on the outside for durability.
The axle is made of stainless steel.
INSTALLATION

RRP 131,89 Dollar
Only 107,69 Dollar

Ducati Streetfighter / Panigale V4 / V2 number...

RRP 296,45 Dollar
Only 272,25 Dollar

TECMATE "OptiMATE1 DUO" battery charger...

TECMATE "OptiMATE1 DUO" battery charger
Charging current 0.6A, suitable for standard, AGM, gel and lithium batteries (LiFePO4 / LFP), battery capacity 2Ah - 30Ah, automatic switch-off, fresh-keeping function
4-stage charger and battery maintenance unit, charges and maintains all vehicle batteries without any settings on the unit. With three indicator lights to show the charging process. ...

RRP 54,45 Dollar
Only 50,82 Dollar

Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke...

Air filter HIFLO HFA-6301 for KTM 1290 SuperDuke / R / GT / Adventure

RRP 24,20 Dollar
Only 21,78 Dollar

New product

Ducati Monster 1200 water and engine protection...

Evotech Performance water coolers and engine guards fit like the original factory equipment, utilising the existing brackets and requiring no modifications. Fits the following MODELS
All our guards are CNC machined from aircraft quality aluminium. The unique design allows airflow through the guard while still providing a high level of protection.
The Monster 1200 mudguards are finished with a black powder coating and all required fixings and easy to follow instructions are included via download here.
The quality of our mudguards surpasses anything we've seen from our competitors and we're sure you'll be proud to have one on your Ducati.

199,65 Dollar

Ducati Multistrada V4 Chigee compatible sat...

Ducati Multistrada V4 Chigee compatible sat nav holder from Evotech Performance
Suitable for the following MODELS
Places a Chigee in the centre in front of the rider
    Attaches via the handlebar clamp
    Chigee mounting point already integrated into the EP mount
    Compatible with Chigee motorbike mount
    All other mounts are included in the kit
    Adjustable horizontal pivot point for easy viewing

105,27 Dollar

Ducati Multistrada V4 Rally-number plate holder

Ducati Multistrada V4 2025+ licence plate...

Evotech Performance has developed and manufactured a licence plate holder for the Ducati Multistrada V4 from 2025 onwards.
Suitable for the following MODELS
Refine your Ducati Multistrada V4 with an Evotech Performance licence plate holder

Would you like to enhance the elegant aesthetics of your Ducati Multistrada V4? Evotech Performance has developed and manufactured a high-quality short licence plate holder especially for your motorbike.
    Precision engineering: CNC-machined aluminium components, including a robust bracket for the rear light, indicator holders and a sturdy number plate holder.
    Seamless OEM finish: A vacuum-moulded plastic underbody provides a clean, factory-like appearance.
    Hassle-free installation: Utilises existing mounting points - no modifications to your motorbike's bodywork required.
    Durable powder coating: Black paint finish ensures long-lasting performance and style.
    Full functionality: Compatible with the rear radar system so it remains fully functional.
    Easy to follow, illustrated instructions are available to download if you want to know how to fit the part: INSTALLATION

381,15 Dollar

Ducati SuperSport 950 Beeline compatible...

Ducati SuperSport 950 Beeline compatible sat nav holder from Evotech Performance
Suitable for the following MODELS
Places a Beeline Moto 2 in the centre in front of the rider
Attachment via the upper bracket
Beeline Moto 2 mounting point already integrated into the EP mount
Compatible with all Beeline Moto 2 motorbike mounts and Beeline Moto 2 motorbike accessories
All other mounts are included in the kit
Adjustable horizontal pivot point for easy visibility